CleanPolymer

Cleaning compound

CleanPolymer is a general purpose cleaning compound compatible with soft and hard PVC, polyolefin resins, soft thermoplastics and suitable for all plastic converting equipment. This product is a cleaning compound containing mineral and organic additives based on LDPE. It mechanically and chemically cleans the degraded polymers and pigments in your process equipment. Our products are especially recommended for changing materials, changing colors, switching off and on, or wiping and cleaning. Cleanpolymer is most effective at temperatures between 140 and 310 degrees Celsius. If you clean below 160°C, reducing the screw speed will prevent overpressure.

 

How to use:

Injection: Use 100% Cleanpolymer without temperature change to clean the injection molding machine. After that, except for the first two parts, collect the rest to break down and reuse seven times. (It doesn’t matter if the manufactured parts are defective)

Extruder: Use 100% Cleanpolymer without temperature change to extrude Cleanpolymer until the extruder is clean. After that, except for a small amount of feed, collect all products for spoilage and use seven times. (It doesn’t matter if the manufactured parts are defective).

It is better to empty the material inside the device by pulling back the injection carriage in cases where the mold of the device and the injection point are needles.

Leave A Comment

All fields marked with an asterisk (*) are required

error: به دلیل حق کپی رایت ، دسترسی شما محدود شده #